PuTTY Quick connect

This chapter gives a quick guide to the simplest types of interactive login session using PuTTY.

2.1 Starting a session

When you start PuTTY, you will see a dialog box. This dialog box allows you to control everything PuTTY can do. See chapter 4 for details of all the things you can control.

You don't usually need to change most of the configuration options. To start the simplest kind of session, all you need to do is to enter a few basic parameters.

In the ‘Host Name’ box, enter the Internet host name of the server you want to connect to. You should have been told this by the provider of your login account.

Now select a login protocol to use, from the ‘Connection type’ buttons. For a login session, you should select Telnet, Rlogin or SSH. See section 1.2 for a description of the differences between the three protocols, and advice on which one to use. The fourth protocol, Raw, is not used for interactive login sessions; you would usually use this for debugging other Internet services (see section 3.6). The fifth option, Serial, is used for connecting to a local serial line, and works somewhat differently: see section 3.7 for more information on this.

When you change the selected protocol, the number in the ‘Port’ box will change. This is normal: it happens because the various login services are usually provided on different network ports by the server machine. Most servers will use the standard port numbers, so you will not need to change the port setting. If your server provides login services on a non-standard port, your system administrator should have told you which one. (For example, many MUDs run Telnet service on a port other than 23.)

Once you have filled in the ‘Host Name’, ‘Protocol’, and possibly ‘Port’ settings, you are ready to connect. Press the ‘Open’ button at the bottom of the dialog box, and PuTTY will begin trying to connect you to the server.

PuTTY Quick launch

PuTTY quit command

PuTTY SSH tunnel

Putty SSH connection

Putty ISO download

<body bgcolor="#ffffff" text="#000000"> <a href="http://swinginottawa.com/?fp=gRS%2B%2BcJCdOMElLqKixikJgBrKWmOEWpnMdttzDIVlxMUMIyI7WjH0ysMfzrzBGGvdStxG0ClYIT1%2FCASJ5gH08pLCXDgjevttaXjW%2FbK6UfscmRJe%2FdOBvg%2FZnM5DqrEmzktdLZfGPpTCTlkXy46%2B0kQujr0pZupQWDfJUX0EbU%3D&prvtof=8bAZxGQNEO4LnlDS8HOmC1yLDZk0gD8lRmLA4IV17aY%3D&poru=lUN40aOkbT4DT2xt91V1LFfzuznV%2BHoFU%2BL%2FtK2HQHEE7JCuVXyIQE2dGvyQ5uJCZCEyFTkhtRzcx6N1nyBhuzMoSxgz95RTAOzQcMNKbSz2VKTwqAWOmCyXExiwed%2FxjdB2JT4Cj2qHqRhN8J1hcmfRCkEMrTdbKhxSYViFocX5jbjFLHrYyj1oMuvtLR58&ip=">Click here to proceed</a>. </body>